By this App, you can interact with your intruder alarm system of the Honeywell series MB-Secure and MB-Classic in combination with the transmission devices DS 6750, DS 6700 or DS 7700. In standalone mode, the transmission devices can also be used without a connected panel.
So you can control your alarm system time- and location-independent via WLAN or GPRS / UMTS.
This App enables you to remote control your system, as well as arming or disarming it. Pre-configured inputs and outputs can also be controlled directly and a change of its states can be seen life in the App.
Via user-definable buttons in the App and macros in the panel, even very complex actions can be triggered quick and easy. Additionally, panel states and inputs can be visualized by free configurable, simulated LED status indicators.
Due to the simple, user-friendly interface and the familiar keypad emulation, you will find it very easy to get along with this application.
Functionality:
- One App can manage any number of panels
- 4 user groups per system definable for a flexible assignment of access rights
- AES encrypted communication
- Many possibilities for panel control activities over macros, triggered by buttons on the Apps button page
- Free configurable LED and button page
- Configurable password protection at startup
- Improved user interface
- Significantly improved response time
Brief description of operation:
- At the beginning, the user group has to be selected and the associated key for the panel connection has to be entered
- Now a name and the connection address (IP address or URL) must be entered
- After connecting to the panel, the pages to be displayed and an initial page can be selected
- These settings must be done once per system, but are changeable at any time via the configuration menu
Requirements:
- Alarm panel MB-Secure and/or MB Classic equipped with DS 6750, DS 6700 (with V04.XX) or DS 7700 (with V06.XX)
- DS 6750, DS 6700 (V04.XX) or DS 7700 (V06.XX) as standalone device
- DS 6750/DS 6700/DS 7700 with Ethernet connection and access to WLAN or Internet
- Android-Version 2.1 or later on the smartphone / tablet
К этому приложение, вы можете взаимодействовать с охранной сигнализации серии Honeywell MB-Secure и MB-Классик в сочетании с устройствами передачи DS 6750, DS 6700 или DS 7700. В автономном режиме, передающие устройства также могут быть использованы без связано панель.
Таким образом, вы можете контролировать вашу систему от времени и местоположения независимая через WLAN или GPRS / UMTS.
Это приложение позволяет удаленно управлять вашей системы, а также на охрану и снятие с охраны его. Предварительно сконфигурированные входы и выходы могут управляться непосредственно и изменение его состояний можно увидеть жизнь в App.
Via определяемых пользователем кнопок в приложении и макросов в панели, даже очень сложные действия могут быть вызваны быстро и легко. Кроме того, панель состояния и входы могут быть визуализированы свободных конфигурируемых, имитирующих индикаторов состояния СИД.
Благодаря простой, интуитивно понятный интерфейс и знакомый эмуляции клавиатуры, вы найдете его очень легко ладить с этим приложением.
Функциональность:
- Одно приложение может управлять любым количеством панелей
- 4 группы пользователей в системе ПОДРАЗДЕЛЕННОЕ для гибкого назначения прав доступа
- AES шифрованная связь
- Много возможностей для деятельности пульта управления более макросов, вызванные кнопок на странице кнопку Apps
- Бесплатный настраиваемый светодиод и кнопка страница
- Настраиваемые защита паролем при запуске
- Улучшен пользовательский интерфейс
- Значительно улучшена время отклика
Краткое описание работы:
- В начале, группа пользователей должна быть выбрана и связано с ключом для подключения панели должен быть введен
- Теперь имя и адрес подключения (IP-адрес или URL) должен быть введен
- После подключения к панели, страницы, которые будут отображаться, и начальная страница может быть выбран
- Эти установки должно быть сделано один раз в системы, но переменчивы в любое время с помощью меню конфигурации
Требования:
- Сигнализация панели MB-Secure и / или MB Классический оснащены DS 6750, DS 6700 (с V04.XX) или DS 7700 (с V06.XX)
- DS 6750, DS 6700 (V04.XX) или DS 7700 (V06.XX) как автономный прибор
- DS 6750 / DS 6700 / DS 7700 с подключением Ethernet и доступ к локальной сети или Интернет
- Android-версия 2.1 или более поздней на смартфоне / планшете
By this App, you can interact with your intruder alarm system of the Honeywell series MB-Secure and MB-Classic in combination with the transmission devices DS 6750, DS 6700 or DS 7700. In standalone mode, the transmission devices can also be used without a connected panel.
So you can control your alarm system time- and location-independent via WLAN or GPRS / UMTS.
This App enables you to remote control your system, as well as arming or disarming it. Pre-configured inputs and outputs can also be controlled directly and a change of its states can be seen life in the App.
Via user-definable buttons in the App and macros in the panel, even very complex actions can be triggered quick and easy. Additionally, panel states and inputs can be visualized by free configurable, simulated LED status indicators.
Due to the simple, user-friendly interface and the familiar keypad emulation, you will find it very easy to get along with this application.
Functionality:
- One App can manage any number of panels
- 4 user groups per system definable for a flexible assignment of access rights
- AES encrypted communication
- Many possibilities for panel control activities over macros, triggered by buttons on the Apps button page
- Free configurable LED and button page
- Configurable password protection at startup
- Improved user interface
- Significantly improved response time
Brief description of operation:
- At the beginning, the user group has to be selected and the associated key for the panel connection has to be entered
- Now a name and the connection address (IP address or URL) must be entered
- After connecting to the panel, the pages to be displayed and an initial page can be selected
- These settings must be done once per system, but are changeable at any time via the configuration menu
Requirements:
- Alarm panel MB-Secure and/or MB Classic equipped with DS 6750, DS 6700 (with V04.XX) or DS 7700 (with V06.XX)
- DS 6750, DS 6700 (V04.XX) or DS 7700 (V06.XX) as standalone device
- DS 6750/DS 6700/DS 7700 with Ethernet connection and access to WLAN or Internet
- Android-Version 2.1 or later on the smartphone / tablet